# Equipment Thread **URL:** \ **Category:** Equipment and Reviews\ **Created:** [April 3, 2019, 8:01am UTC](https://ukskateforum.co.uk/t/equipment-thread/295 "2019-04-03T08:01:20Z")\ **Posts on this page:** 1\ **Showing post:** 3251
**Author:** ![Mike](https://ukskateforum.co.uk/user_avatar/ukskateforum.co.uk/mike/32/15747_2.png) [@Mike](https://ukskateforum.co.uk/u/Mike)\ **Post date:** [February 18, 2025, 4:36pm UTC](https://ukskateforum.co.uk/t/equipment-thread/295/3251 "2025-02-18T16:36:25Z")
Moving truck shite over here… > [@Gone Skateboarding?](https://ukskateforum.co.uk/t/gone-skateboarding/1415/2084): > > [Guaranteed](https://www.reddit.com/r/skateboarding/comments/1crd26b/independent_lifetime_warranty/) for life aren’t they? Speak to shiner and re up Emailed Shiner via a couple of emails I found. Their Contact Us form doesn’t work haha. We shall see if I get anything back… > [@Gone Skateboarding?](https://ukskateforum.co.uk/t/gone-skateboarding/1415/2086): > > It’s possible that you might. When Indy brought in Stage 9 they lowered the height from 55mm to 53.5mm, and this altered the way they turned. > [@Gone Skateboarding?](https://ukskateforum.co.uk/t/gone-skateboarding/1415/2087): > > Wack them on. It’ll be fine. 🤪 Probably/maybe/likely/maybenot…Forged plates reduce the height to 53.5ish on a stage 11 which is similar to the 9/10. I’m looking at them now and 10 / 11 hangars side by side aren’t noticably different, however 10 has a more recessed cup for the bottom (board side) bushing and when mounting onto the forged plate this then reduces the axle height further. Yoke narrower which will catch the washers earlier. I’m sort of cutting it fine with 54mm wheels as it is and they may be too much for the 10’s on the forged plate of the 11, although the tighter turn/narrower yolk may mitigate this a little, I’d probably still have to drop to 50-52mm. Could use my old 54s which are now 52… Or maybe I should shut the fuck up and crack on with knocking axles back a couple of times per session 🙃 Edit - Had a reply from Shiner and a warranty form to fill out. --- _[View the full topic](https://ukskateforum.co.uk/t/equipment-thread/295)._